All of the needle: one or two of the two colors, this pair is 41 yards, and the large size should be more.

This pair of shoes have added a thick layer of sponge shoes and soles, so it looks very strong. This pair of shoes shoe code is 36/37 yards, and the bottom is written under this, because

It has been added to the thick shoes, so although the shoe size is large, it is a child of 5 or 6 years old (usually wearing 32/33 yards of children), using the No. 13 needle, normal medium thick line.

The overall weave is from the beginning of the foot, weave it to the legs, then pick the knitted foot neck

The specific weave is as follows;

1, use a black line from 11-pin (this 11-pin is called the first needle)

2, weaving a row

3, then pick up 11 stitches on the other side of the throttle (this 11-pin is called the second needle, that is, the red needle on the figure)

4, returning the 11-pin on the first needle on the black line (this time is close to the closer, wearable can be more awkward), use the third needle (blue line on the picture)

Two needles on the first needle and the second needle, then continue to woven the 11-pin on the second needle, this is a complete line, in three needles, this line

It is a counter (two-needle-chaped two-needle not a counter). This line has a total of 24 pins (11 + 2 + 11). In the future, the needle is next to the two needles pick it up.

5. Return 24 pins on these three needles, this line is all positive needles, not adding,

Remember that the needle is added to the needle

6. After the five rows of weave after 5, as follows: 11 needles on 1, change the red line to twist 1 needle, then continue to use the two needles of the red line to pick up the two needles, continue to use

The red line twists a needle and then uses a 11-pin on the second needle of the black wire. This line is over. The number is allocated as follows: The first needle 11 pin (black line), the second needle 11 pin (black line), the third needle 4 needle (red line), a total of 26 pins.

7, return to the 26-pin, the third needle is still using the red line. This line does not add

8, 11 needles on the first needle, the third needle is so well: use the black wire to weave the first needle, then use the black line to twist 1 needle, change the 2 pin in the middle of the red line, then again

Use the black line to twist 1 needle, with the remaining needle of the black wire, so that the third knitting is completed, and the black line continues to woven the 11-pin on the second needle. This line is completed, a total of 28 needles,

The first and second needles are 11-pin, and the third needle is 6-pin.

9, return to the woven, the third needle is still the middle 2 needle with the red line, the 4-pin line, this line does not increase

10, 11 needles on the first needle, the third needle is so well: 2 needles with black wire, then use the red line to twist 1 needle, use the red line to weave the 2 needle, with the red line twist 1 needle, switch to the two needles left in the black wire, so that the third knitting is finished, and the 11-pin on the second needle is continued with a black line. This line is completed, a total of 30 needles,

The first and second needles are 11-pin, and the third needle is 8-pin.

11. Return to the 30-pin, the third needle is used as the same as 10. This line does not add

(To this red nose is woven)

12. Third needles on the first needle, the third needle be added to 10-pin, and the 11-pin on the second needle is woven. This line is completed, a total of 32-pin, this line of full black line

13, return to the 32-pin, this line does not add, full black line.

14. The 11-pin on the first needle is woven, and the three needle be added to 12-pin, and the 11-pin on the second needle is woven. This line is completed, a total of 34-pin, this line is full of black lines

15, return to the 34-pin, this line does not increase, all black lines.

(If you want to weave your eyes, your eyes can be weaving, you can embroidered, the left and right eyes should be symmetrical)

16. Use a 7-pin on the first needle, then use the red wire to weave 3 pins, then use the first needle and the 5-pin on the first needle on the first needle, continue to use black. Row

1 needle, the two needles in the middle, twist a needle, then weave 6 needles, use the red line to weave 3 needles, with the remaining 7 needles left. This line is over, a total of 36 pins.

17, return to the 36-pin, this line does not increase, the same line is 16, that is, only 6 needle red needles

18, use the 6-pin on the first needle, then use the red line to weave 2 needles, use the black wire to weave 1 pin, then use the red wire to weave 2 pins, then use the black line to weave, remember in the middle Twisted needles next to the two needles, and the other side is symmetrical. This line is over, a total of 38 pins.

19, return to the 38-pin, this line does not increase, the line is the same 18,

20. Use a 7 pin of the first needle on the black wire, then use the red line to weave 3 pins, then use the black wire to weave, remember to twist the needle next to the two needles, and the other side is symmetrically woven. This line is over, a total of 40 pins. In the middle of the 2nd, the two needle red needles were adjusted around.

21, return to the 40-pin, this line does not increase, the line is the same as 20

(Here, both sides of the eyes)

22, full black wire, remember to add 2 pins, a total of 42 needles

23

24. All black wires weave, remember to add 2 pins, a total of 44 needles

25. All black wires weave this line, do not add, a total of 44 needles

(Let’s start with your ears below)

26, using the 7 needles on the first needle of the yellow wire, continue to use the black wire to weave 9-pin, the remaining yellow lines to the middle two needles, remember this line to twist the needle, the other side is symmetrically woven. .

This line is 46 pins

27, return to the 46-pin, do not add, use the line situation 26

28, use the 8 needles on the first needle of the yellow wire, continue to use the black wire to weave 7-pin, the rest is used to remove the two needles in the middle, remember this line to twist the needle, the other side is symmetrically woven. .

This line has a total of 48 pins

29, return to the 48-pin, not adding, the line is only 28

(Adjust in both sides of the middle, 48 pins to the two needles, that is, the number of needles on the third needle is screened to the left and right needles, each 24 needles, start to divide the left and right Weaving, first weaving one of them, the other weave is the same, and one of them is described as an example)

30, 9-pin on a needle with yellow wire, continue to use black wire to weave 5 pins, the rest is yellow wire, this line is 24 pins

31, return to the woven, these 24 needles, do not add, line the same 30

32. Use a 10-pin on a needle with a yellow wire, continue to use a black wire to 3 pins, the remaining yellow wire, this line is 24

33, return to the woven of these 24 pins, do not add, line the same 32

34. Use the 11-pin on a needle with yellow wire, continue to use black wire to 1 pin, the remaining yellow wire, this line is 24 pins

35, return to the woven these 24 pins, do not add, use the line to 34 (until this, the ear woven)

36, do not add, use yellow wire to 35 lines

37, then use round-trip knitting steps

That is, a total of 24 needles, when weaving to 16, then return to 8-pin

(The same is the same, the other weave is the same, two pieces closed, then pick the knitted foot neck above, with threaded knit, how high it is to decide)