Life wood engineering, how to make red wine glasses inverted racks

0 Comments

This is a bracket designed for placing red wine glasses. It can be installed on the wall by a long wooden board and inserted a cup bracket on the wooden stick. When you use it, you just need to buckle the cup into the bracket stick. The entire design is like a hanging hanger. In addition to considering its practicality during design, it also integrates its aesthetics into the design so that it can be practical and beautiful.

Main material:

生活木工学,怎样制作红酒杯倒挂架

Redwood blocks, round wooden sticks, hand saws, wood planing, stalk, straight ruler, table diamond, polishing machine (or sandpaper), rubber hammer, wooden screws, etc. (buying tools, go to the wooden craft micro -mall: http://wap .mujiangquan.com/).

生活木工学,怎样制作红酒杯倒挂架

Production experience:

生活木工学,怎样制作红酒杯倒挂架

With the refurbishment of the design, the wine glass rack gradually becomes a taste, and it can even show personal quality of life. Today, the making method of making this red wine glass rack shared by the carpenter circle (WeChat: MUJIANGQUAN) is relatively simple. As long as you have a certain woodwork foundation, you can do it. Because the cup holder is not prepared to paint by logs, the polishing must be fine.

生活木工学,怎样制作红酒杯倒挂架

Step 1: Tailor -made design

生活木工学,怎样制作红酒杯倒挂架

First measure the size of the cup pillar and the cup body of the red wine glass with a calibration. Based on the measurement of the two wooden sticks used to hang the red wine glass, and the spacing of the wine cup and the cup. Then calculate the design size of the red wine glass rack is 5.1*45cm, the distance between the two round wooden sticks is 2.5cm, and the spacing between the cups is 6.4cm. It is just the shelf of 5 red wine glasses (as shown in the figure).

Step 2: Make a hanging board

The wood of the hanging panel is best to choose wood with higher hardness and density, such as ordinary mahogany. It is not only beautiful to make such wood, but also good stability. During the production, first cut the wooden board with a hand saw to 5.1*45cm (pictured), and then place the cut wooden board on the woodwork table. Use a table diamond to use the design drill to fix the round hole of the round wooden stick.

Step 3: Clean up and polish

Before grinding, use a small drill bit to drill two wooden screws to install holes, which is convenient for the wine glass bracket to install on the wall. After drilling, start grinding, you can polish it with a polished machine, and you can use sandpaper to polish. From thick to fine, the hanging panels and round wooden sticks should be polished and smooth (pictured).

Step 4: Make a cup link

First cutting the round wooden stick with a hand saw, 10 round wooden sticks with a length of 15cm. First grind the two ends of the lower ends with the two ends of the wooden stick, and then use the sandpaper to polish the surface of the wooden stick. After the wooden stick is processed, insert the round wooden stick into the hanging panel that has just been drilled by the round hole with a rubber hammer. Finally, the entire shelf is repaired by the details of the details.

生活木工学,怎样制作红酒杯倒挂架

Step 5: After installing!

生活木工学,怎样制作红酒杯倒挂架

First measure the height of the installation position with a tape measure, and then put the bracket on the wall first, and mark the installation position with a pencil. Then use the impact drill to hit the two installation holes on the standard position, then cut two wooden sticks to put it in the wall on the wall, and finally use a woodwork to cut off the excess part (used for fixing the screws used to install the bracket). Install the red wine glass bracket, so that the bracket installation is stable, but also beautiful.

生活木工学,怎样制作红酒杯倒挂架

If a high -grade red wine can show grade, then a cup holder can see the quality of life better. It is easy to make this practical wine glass rack today. If you are a person who likes to drink red wine, it is also a good choice to prepare such a red wine glass rack at home. [More attention to the WeChat MUJIANGQUAN]

生活木工学,怎样制作红酒杯倒挂架

For more, please pay attention to the wooden craft WeChat: MUJIANGQUAN

Learn woodworking, go to the wooden crafts! Popularly publish popular woodworking teaching and information, professional, personality, interesting, senior … everything is available.