TI TS5USBC402 dual road 2: 1 usb 2.0 multi -way replicator/multi -way signal separator switch

0 Comments

TI TS5USBC402 dual-road 2: 1 USB 2.0 multi-way replicator/multi-way signal separator switch is a two-way low-power dual-port high-speed USB 2.0 simulation switch, which has an integrated protection function for the USB Type-C ™ system. The device is configured with dual-road 2: 1 or 1: 2 switch to optimize the USB 2.0 D +/-line in the USB Type-C ™ system. The protection function of the TS5USBC402 on the I/O pins can withstand up to 20V voltage and is equipped with automatic shutdown circuit to protect the system components behind the switch. TS5USBC402 uses a small 12 -pin DSBGA packaging, making it an ideal choice for mobile applications and limited space applications.

Frames

Ti TS5USBC402 feature

Power range: 2.3V to 5.5V

Differential 2: 1 or 1: 2 switch/multi -road reuse or flexible dual -road single -end cross -point switch

Public pins have 0V to 20V over pressure protection (OVP)

Power off protection protection when VCC = 0V

Lower RON (maximum value is 9Ω)

Typical bandwidth is 1.2GHz

CON typical value is 4.5PF

Low -power ban mode

1.8V compatibility logic input

ESD protection performance exceeds JESD 22 standard

2000V human model (HBM)

TI TS5USBC402双路2:1 USB 2.0 多路复用器/多路信号分离器开关

TS5USBC402: Standard temperature range is 0 ° C to 70 ° C

TS5USBC402i: industrial temperature range is -40 ° C to 85 ° C

TI TS5USBC402双路2:1 USB 2.0 多路复用器/多路信号分离器开关

Small DSBGA packaging

application:

TS5USBC402EVM USB 2.0 Multi -Road Reverandronator/Multi -Road Signal Separator Evaluation Module

Texas Instruments TS5USBC402EVM USB 2.0 Multi-Road Candidator/Multiple Road Signal Separator Evaluation Module (EVM) is a printing circuit board (PCB). It is designed to help customers evaluate the TS5USBC40X device facing Type-C applications. TS5USBC40X is a two-way low-power dual-port high-speed USB 2.0 analog switch, which has an integrated protection function for the Type-C system. The device is configured with dual-road 2: 1 or 1: 2 switch to optimize the USB 2.0 d +/-line in the Type-C system.

characteristic

Instead

Use USB VBUS or 5V to 5.5V DC input (via the power jack j3) to supply power to the evaluation module

Visit the I2C bus through a needle

Can be configured through the DIP switch